AMIP Forum

achat altace Christmas

imatteMep — Sun, 19 May 2013 21:08:14 +0400

Hallo! My name is SHOSHANA. My home is situated in Voorheesville.
altace coughing Erie and generic for altace cc achat altace imatteMep: More info also: cephalexin altace zyprexa positive direct coombs Chriesman and buy cheap altace no rx "The bathroom is the riskiest room in the house," says Garry Gardner, chair of the American Academy of Pediatrics' council on injury, violence, and poison prevention.
P.S. Excuse me for choosing category to leave a note for you about altace htc 1025 extremer morgan irrespective

ultraviolet of allopurinol Smithville Flats

Jousuaryanalo — Sat, 18 May 2013 07:26:25 +0400

Howdy! I'm MAYOLA. I am from Lattimer Mines.
buy allopurinol Smithers and hla-b 5801 allopurinol too much allopurinol San Antonio Jousuaryanalo: Allopurinol was also commonly used in chemotherapeutic treatments to treat 'tumor lysis syndrome' (as these regimes can rapidly produce severe acute hyperuricemia) although it has gradually been replaced by urate oxidase therapy. Doc recommend also: allopurinol and vitamin c Smithfield and allopurinol lab hahnemann San Bernardino A medium pear, coupled with an 8-ounce glass of unsweetened almond milk.
P.S. Sorry for selection forum to leave a message for all about allopurinol causes anemic exempted confiding deltas zentral

Foobar + Amip + Skype

crazzyhorse — Thu, 02 May 2013 02:53:15 +0400

Hey, I use Amip for my stream and that works pretty fine so far, the problem I have is that Amip is constantly spamming my skype home and I couldn't find a setting to stop it from doing that. Even if I didn't turn it on for my stream it still spams skype.
This is probably a pretty stupid question I know, but thanks in advance.
Cheers crazzyhorse

Hotkey Deregistration

rootbear75 — Wed, 17 Apr 2013 13:43:48 +0400

I've tried disabling the hotkey via the configurator menu, and even changing it.

CTRL J is by default Google Chrome's Downloads hotkey...

well, after changing the preferences, it still opens up the playlist search.... and I have no idea why it wont deregister itself. Heck, i've even disabled hotkeys completely and it still wont deregister itself.

Pics:
http://puu.sh/2BFxB

http://puu.sh/2BFxQ

Even with the disabling of the hotkeys and the change of the hotkey in the settings... CTRL J still opens this window.
http://puu.sh/2BFyt

I have even tried disabling the program completely at one point.

Help?

Winamp Streaming to TuneIn API

timmywa — Sat, 26 Jan 2013 02:42:13 +0300

I did some searches here and would like to know how to do the following.

I stream from winamp to Edcast and out to my provider. TuneIn has an API to display now-playing info on their services. You can see all the info here: http://tunein.com/broadcasters/api/

Basically, they use a GET command. Here's the code snippet:

CODE

# Update the song now playing on a station
GET http://air.radiotime.com/Playing.ashx?partnerId=<id>&partnerKey=<key>&id=<stationid>&title=Bad+Romance&artist=Lady+Gaga

I am getting the ID and Keys in just a bit but I need to know if this tool is what I need to accomplish this. I'm not a coder or have any idea on GET and such.

I appreciate your help.

Thanks.

bug aimp 3.20 build 1148

desbutes — Wed, 14 Nov 2012 18:12:46 +0300

after a moment , reading a playlist ,it's stop and message is coming

Application raised exception at adress 0084EC54 in module AIMP3.dll, see bug-report for more details

win xp 32bits

Disc# variable

Duneflower — Thu, 25 Oct 2012 08:17:16 +0400

Pretty self-explanatory; just wanna see a variable added to pull the disc-number when it's available, assuming you ever manage to get the project moving again, Serge. Believe me, I know the feeling... -.-

I wonder why the number of similar projects is near zero...

AMIP + iTunes 10.7.0.21 = Broken Home Sharing

bigc90210 — Mon, 22 Oct 2012 18:03:32 +0400

hi all,

first off i'd like to say a huge thank you for this awesome piece of software, excellent work!

The issue that im having is that i have a home server which has itunes on it (win 7 x64 ultimate, itunes 10.7.0.21) and it streams my media from its library around the house using home sharing to the likes of my ipad and iphone. its been working fine since day 1, i installed AMIP and suddenly i cant connect my ipad to the server. I can see the server, i click on it and it just spins (on the ipad).

Ive tried restarting the server, restarting the ipad, restarting the router, checking the firewall ports, and still nothing. AMIP itself works (im using it to output my now playing to a text file, which i then use in my gaming streams overlay) but there is a direct correlation of installing AMIP to home sharing not working.

Just thought i'd give you guys the heads up.

Thanks

C

HFS+ support for AAC audio in bootcamp

Sracinas — Fri, 19 Oct 2012 02:46:06 +0400

It's a long shot and probably no one is going to take this seriously, aac is working in HFS+, but every time I open a song, I have to wait a about 2-3 seconds till it starts playing. Doesn't look like much, but it's really annoying. MP3 is fine, but all my music is aac. I can live with that, but it would be great if this annoyance would dissapear. I'm using v3.20 beta 2, build 1139. Thank you in advance. Other apps open aac without any wait time, but I love AIMP3. I'm using Mac Drive 8.0.7 for HFS+.

AMIP + Winamp [Streaming]

xAeciiD — Sat, 29 Sep 2012 01:25:57 +0400

Hey Hey !

I use Winamp and AMIP to show a playlist in my livestream.

And i dont wanna get the text in browsers and ablications i only wanna use the writing playlist as txt feature cause it use a lot of cpu <,< i did disable all withotu the writing playlist in text file feature but i still see it ... can i fix it ?

AMIP+MediaMonkey4+Ychat2.8.6-2

Furexus — Mon, 27 Aug 2012 05:34:00 +0400

Hi,

I've recently switched to Media Monkey and it seems that AMIP behaves kinda strange there. Everything works; i can edit preset #3 (if MM is run as administrator) as long as I start it with "say +whatever variables".

But that gives me in XChat just a regular Message, like:
"Furexus:np Band - Album - Title"

But I want to use something like /me np: %1 - %4 - %2. Just tying "say /me %1 - %4 - %2" doesn't work as it doesn't perform an action but just types "/me" without recognition of the metasign. I want something like
"Furexus np Band - Album - Title"

Has anybody a solution for this?

Thanks in advance!

Cheers
Furexus

Playlist total size in gigabytes and megabytes (example 355gb or 125mb)

TheAslan — Sun, 12 Aug 2012 20:21:18 +0400

Playlist total size in gigabytes and megabytes (example 355gb or 125mb)

Can you please add this feature?

AMIP and x64 applications

amipusr — Sat, 07 Jul 2012 01:39:05 +0400

Hi!

I've been using AMIP for quite some time. Excellent plug-in! I'm using it for winamp.

I'm mostly using it's hotkey combination for various applications and today I noticed it doesn't work at all with x64 programs.

I've tested: Internet Explorer x64, Miranda x64 - both didn't work at all.
It works just fine with Firefox (32 bit) or any other 32 bit application.

I have tested generic winamp hotkey combinations - they did work in x64 applications, but not AMIP's hotkey, so I guess it's 99.9% issue related to AMIP.

Could you please look into it and update plug-in for winamp / foobar / others?

also here is another thread about this - http://amip.tools-for.net/board/index.php?showtopic=703

Thanks.

Longer Delay

^Sydney — Sat, 23 Jun 2012 13:17:34 +0400

when i play my little radio show .. everyone starts talking in the chat room about the song cause they see it before they hear it.

it seems that about 8 seconds is all the delay the announcer will take... is this a bug?

ie if i put 25000 ms ie 25 seconds .. it waits about 8 seconds

would like to be able to delay it so all those around me hear it at the same time ie listeners or chatters with no forewarning

iTunes starts permanentely after deinstallatian

NeedHelp — Tue, 19 Jun 2012 21:58:55 +0400

Hi,

i used AMID for a long time and everything was cool, but when i decided to deinstall the program big trouble starts: Everytime I close iTunes, the player starts itself again - there is no way of closing it - its running all the time.
To solve that problem I tried to:

- Re-Install iTunes - no effect
- Re-Install Skype - no effect
- Install AMIP again and deinstall again - no effect
- Even a complete Re-Install of the OS (Win7/64) had no effect

I dont know, which process or programm calls iTunes to open itself. Maybe its Skype.

Please, if there is anyone out there, who can help: Tell me that trick!
Thank you!!!

some help plz

istealth — Thu, 24 May 2012 22:59:35 +0400

Iam using the Advanced MIRC Intergration Plugin in winamp and it works fine but is there away to add commands so like when i type !nowplaying it will display what the Advanced MIRC Intergration Plugin in has setup or something

this is for a justin.tv chat bot

AIMP 2.67 + Trillian 5.1 + Foobar2000 1.1.10

Virgo Floyd — Sat, 05 May 2012 21:09:18 +0400

hey!

I have downloaded [amip_foobar_09.zip] and I'm trying to use it with [Trillian 5.1 Free build 19] and my music player is [Foobar2000 v1.1.10] but nothing shows up in my status

"current song" is checked in Trillian settings, tried re-installing AIMP and restarting Trillian and everything but no success

thanks in advance

AMIP + foobar2k + miranda irc

lain — Tue, 06 Mar 2012 19:22:04 +0300

Hi.

I'm trying to configure amip to the miranda irc protocol. Is this possible?
If it is, what settings should i use? Do i need any additional plugins for miranda?

Thanks in advance!

EDIT:
Oh, i forgot to mention that it works perfectly fine out of the box with the mirc client. It also works fine with the other miranda protocols. I, however, can't find any documentation on how to configure it in order to work for the irc protocol.

Will AMIP be compatible with AIMP 3 anytime soon?

ZShock — Sat, 03 Mar 2012 19:31:52 +0300

Just updated to AIMP3... quick search is not working correctly; right now it's the only thing I care about.

amip crashing mediamonkey 4.0.2.1462

Delirium — Wed, 04 Jan 2012 02:00:23 +0300

As described in the title, the gen_irc.dll crashes MediaMonkey 4.0.2.1462. With MediaMonkey 3 all worked well.

Defunctional scandinavian letters!

King Elessar — Mon, 02 Jan 2012 22:39:47 +0300

Why scandinavian letters does not work in all songs in AMIP?

AIMP 3.x + ASIO 2.0

Tai — Sun, 25 Dec 2011 20:24:02 +0300

Is there a possibility to make some options in further aimp versions supporting ASIO 2.0 channel mapping simillar to this from foobar 2000?

AMIP not working with Yahoo IM and Foobar

Kollapse — Fri, 23 Dec 2011 00:19:09 +0300

I have Yahoo Messenger 11, and Foobar2000 v 1.1.19. Amip works fine with WLM, but nada with Yahoo. I have tried both autodetect for my login and manual entry, and nothing seems to work.

Anyone else have issues with this?

amip and Win7?

^Sydney — Mon, 19 Dec 2011 14:28:45 +0300

good evening,

One of our new DJs is trying to install Amip.

now ive used it on XP successfully for years without issues of any kind.

she has uninstalled it, and reinstalled it, run as administrator, done all the right things and yet it continually gives her a result of

"Unable to Config"

i checked her config path and it seems correct, ie its stuck the plugin.ini into winamps plugin folder, both versions of amip and configurator are current and she has up to date JAva

the only thing different is windows 7.

in fact after trying to do things it even wont let her untick the "enabled" box or change any of the presets and even greys out the Apply button.

we are at a bit of a loss here...... can anyone assist??

ok after a quick thought it may have been greying out the apply button so she could hit OK ..... still doesnt explain the "unable to config"

Font Colours using custom Background image

I3looM — Fri, 09 Dec 2011 16:01:15 +0300

Hi all,

I've made a custom background png file that I would like to use instead of the default white base image. When I use this it changes the colours of the fonts. Its almost like the font values are relative to the background colours somehow. what do I need to change so that font colour values I use in $config['font_color'] and $config['font_colormono'] are the actual colours that I see regardless of background image.

Thanks